Car OBDII ECU Emergency Direct Current Power Source Cable

1. Easy to use – Just plug the cable into the cigarette port and then

2. Function – Saving your cars memory and all power functions without loosing it’s memory.

3. Powered up OBD2 device – This Cigarette lighter to OBD2 16pin female power cable can preserve vehicle codes and electronic presets , and it also can save you radio information. This device can work with any 12V direct current power source, including jump starter, direct current 12V Lead-acid battery or another car ’s direct current 12V power outlet. 4. This Cigarette lighter to OBD2 16pin female power cable can preserve vehicle codes and electronic presets, and it also can save you radio information. It can be powered by any jump starter with a 12V outlet into an OBD II Port Memory Saver. 5. Use this to power your HUD without having to plug into OBD port (the HUD usually plugs into the OBD port for power). Use this cable to power any OBD port. Specification: It has one obd female connector at one end and cigarette lighter at the other end. Compatible for diagnostic tools with a 16 pin socket. Cable Length: 50cm /1.6ft

1. When working with the vehicle’s battery, review all the battery manufacturer’s and vehicle manufacturer’s safety instructions, warnings and directives regarding battery disconnection, removal and replacement.

2. The vehicle’s electrical system is receiving power from memory saver through the OBD connection. Therefore, the vehicle’s battery connectors are electrically live and should be covered with an insulator to prevent the connectors from touching metal or each other and causing a short circuit. After each use, disconnect the memory saver and use a dry cloth to wipe all dirt or oil from the connectors and the cable.

3. During battery replacement, DO NOT turn on (ignition)